notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rev. a m151121 edr-7458u SXBP-35N+ urj/rav 161122 page 1 of 1 50 ? 30 to 40 mhz maximum ratings operating temperature -40 o c to 85 o c storage temperature -55 o c to 100 o c rf power input 0.5w max. input 1 output 8 ground 2, 3, 4, 5, 6, 7 pin connections surface mount SXBP-35N+ bandpass filter applications ? fm radio rejection ? receivers / transmitters ? professional mobile radio / public acces mobile radio (pmr/ pamr) bandpass filter electrical specifcations (t amb = 25 o c) typical performance data at 25 o c features ? excellent rejection ? good vswr, 1.1:1 typ @ passband case style: hf1139 functional schematic SXBP-35N+ group delay 30 40 50 60 70 80 90 100 27 29 31 33 35 37 39 41 43 45 frequency (mhz) group delay (nsec) SXBP-35N+ insertion loss 0 10 20 30 40 50 60 70 80 90 100 1 10 100 1000 10000 frequency (mhz) insertion loss (db) SXBP-35N+ return loss 0 5 10 15 20 25 30 35 40 45 1 10 100 1000 10000 frequency (mhz) return loss (db) frequency insertion loss return loss frequency group delay (mhz) (db) (db) (mhz) (nsec) x 1.0 82.11 0.27 0.04 27.0 91.70 19.0 57.19 1.77 0.17 28.0 79.45 21.0 29.79 0.24 0.23 29.0 65.64 23.0 17.86 0.30 0.42 30.0 56.11 25.0 7.98 0.43 1.52 31.0 50.11 26.0 4.23 0.44 3.50 32.0 46.02 27.0 1.98 0.32 7.49 33.0 43.18 30.0 0.60 0.05 26.89 34.0 41.24 35.0 0.52 0.02 30.12 35.0 40.01 40.0 0.64 0.04 31.03 36.0 39.17 44.0 1.59 0.27 8.65 37.0 38.94 46.0 3.83 0.56 3.67 38.0 38.92 48.0 7.66 0.70 1.54 39.0 39.48 51.0 14.31 0.67 0.57 40.0 40.67 60.0 32.50 0.62 0.19 41.0 42.78 65.0 43.63 0.84 0.16 42.0 45.62 500.0 53.02 0.17 0.30 43.0 49.26 1350.0 55.12 6.44 0.63 45.0 53.47 center freq. (mhz) passband (mhz) (loss < 1db) f1 - f2 stopbands (mhz) vswr (:1) loss > 20db f3 f4 loss > 30db f5 f6 passband max. stopband typ. 35 30 - 40 21 60 19 65 - 1350 1.5 18 rf in rf out permanent damage may occur if any of these limits are exceeded. demo board mcl p/n: tb-368 suggested pcb layout (pl-230) outline dimensions ( ) inch mm outline drawing a b c d e f .44 .74 .27 .200 .07 .060 11.18 18.80 6.86 5.08 1.78 1.52 g h j k l m wt. .040 .660 .200 .470 .055 .060 grams 1.02 16.76 5.08 11.94 1.40 1.52 3.0 typical frequency response f6 f4 f2 f1 f3 f5 30 20 1 attenuation (db) frequency (mhz) pcb land pattern suggested layout, tolerance to be within .002 +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
|